Citadel Activation Software

Create a Bootable USB Thumb Drive

1. Insert a USB thumb drive into your computer.

2. Format a USB thumb drive to the FAT32 file system.

Caution
Be sure you backup any files on the drive because they will be erased!.
Important
Ensure that no other partitions or files exist on the thumb drive! If you have multiple partitions on the thumb drive, you may have to use other tools to delete them such as “Disk Management” which is built into Windows 8.1 and Windows 10.

3. Open the ZIP file you downloaded and extract the folder inside to your computer.

4. Navigate into the folder and copy the contents to the thumb drive.

Important
Do not copy the folder itself over to the thumb drive. Your system will probably be unable to boot from it if you do.

 

You now have a bootable thumb drive. If you require more help, please contact Technical Support. See Product Support.

Configure UEFI/BIOS Settings

You will need to properly configure your BIOS or UEFI in order to properly boot from the thumb drive. To do so, follow the instruction set below that’s applicable to your situation. Specific instructions have been provided for Dell computers, as well as a generic instruction set for all other computers.

 

For All Computers

Follow these steps to ensure your computer’s BIOS or UEFI settings are configured correctly. To access the BIOS or UEFI, you may have to press Delete, Escape, F2, or F12 when starting your computer up.

1. If you have an option for “UEFI Boot Path Security” or something like it, be sure to change it to Never.

2. Ensure that your “SATA Operation” is set to AHCI

3. If you have a discrete video card, ensure your primary display detection is set to Auto.

4. Disable “Secure Boot”.

Note
The Citadel SSD does support Secure Boot, but only once activated. You may reenable Secure Boot after you finish activating the Citadel SSD

For Dell Computers

Follow these steps to ensure your Dell computer’s UEFI settings are configured correctly. To access the UEFI, you may have to press F2 or F12 when starting your computer up.

  1. Navigate to “General > UEFI Boot Path Security” and change it to Never. UEFI_Screen1_cropped.png
  2. Navigate to “System Configuration > SATA Operation” and change it to AHCI. UEFI_Screen2_cropped.png
  3. If your Dell computer has an upgraded video card, navigate to “Video > Primary Display” and ensure it is set to Auto. Otherwise, this option will not be available and you can continue onto the next step. UEFI_Screen3_cropped.png
  4. Navigate to “Secure Boot > Secure Boot Enable” and uncheck the box next to the “Secure Boot” option to disable it. A dialog box may pop up warning you that disabling Secure Boot will reduce system security. Click Yes to disable it. Note – The Citadel SSD does support Secure Boot, but only once activated. You may reenable Secure Boot after you finish activating the Citadel SSD. UEFI_Screen4_cropped.png

Install an Operating System or Virtual Environment

Your Citadel SSD has been shipped to you deactivated and unlocked. Install any operating system (OS) or virtual machine (VM) at this time.

Important
If you need to turn on a Trusted Platform Module (TPM), Virtualization Support, or Trusted Execution, you can turn them on in the UEFI.

How to Boot into the Thumb Drive

 

1. Insert the bootable USB drive with the Citadel SSD activation software into the computer and turn it on.

2. Continually press the key for accessing your motherboard’s boot menu while the computer starts up.

This key to access it differs on different models, but the most common keys are F12, F10, F2, or Esc.

3. The motherboard’s boot menu will apear. Choose the USB thumb drive from the list of boot options.

4. A Linux BASH prompt will load. Press Enter to activate the console.

Activate the Citadel SSD

1. Boot into the thumb drive using the steps above.

2. Type in the command below to run the activation software. Please note that the following text is case sensitive.

CitadelStart -p <password>

Note
<password> is the Administrator password. The default Administrator password is Administrator, and it is case-sensitive
Important
If you are using the default Administrator password, you should change it as soon as possible by logging into the Citadel SSD Settings Console.

BASH-Prompt-2.png

    3. The software will activate the pre-boot authorization and will automatically shut down the computer when finished. Remove the USB thumb drive and reboot the system.

    The Citadel SSD has been activated.

    First Time Login

    BASH-Prompt-2.png

    Important
    Before attempting to log in, make sure you have first activated your Citadel SSD

    1. If you haven’t already, turn on the computer. The Citadel SSD software will load.

    2. Click the Accept button at the bottom of the Disclaimer screen that appears.

    3. Log into the default Administrator account. Use the following credentials, which are case sensitive:

    • Username: Administrator
    • Password: Administrator

    Note
    Usernames and passwords are case sensitive.

    The computer will appear to reboot and your OS or VM will now start up.

    Note
    You should immediately change the Administrator password to maintain operational security. Please refer to the Citadel SSD User Manual located at digistor.com for information on how to operate and manage your SSD’s pre-boot authentication.

     

    Product Support

    Your investment in DIGISTOR products is backed up by our free technical support for the lifetime of the product. Contact us through our website, digistor.com/support, or call us at 1-800-816-0225.