PBA feature shipping in Q4 2022
|Citadel C Series Select||Citadel C Series Advanced|
|✓ Pre-boot authentication keeps intruders out||✓ Pre-boot authentication keeps intruders out|
|✓ Zero Trust architecture||✓ Zero Trust architecture|
|✓ Additional authentication for file access||✓ Additional authentication for file access|
|✓ FIPS 140-2 L2 + Common Criteria (CC) versions available: NIST certificate #4294. Listed on the NIAP Products in Evaluation List.||✓ FIPS 140-2 L2 + Common Criteria (CC): NIST certificate #4294. Listed on the NIAP Products in Evaluation List.|
|✓ Verified device erasure|
|✓ Secure data access logs|
|✓ Automated Threat Response|
|✓ Address critical requirements for data governance and privacy programs|
Data at Rest Security... Simplified
Citadel FIPS-certified self-encrypting drives (SEDs) are the only SSDs to integrate multifactor authentication, pre-boot authentication (PBA), and hardware encryption into a complete, low cost solution.
Pre-boot Authentication Keeps Intruders Away
Powered by Cigent®, our built-in PBA unlocks access to the encrypted operating system or virtual machine on the Citadel SSD as well as the data stored there. This secured data is encrypted by NSA-approved Advanced Encryption Standard (AES) 256-bit encryption at the hardware level. Once booted, Citadel allows no-overhead, hardware-speed access to encrypted data at the full performance of the system.
Adversaries cannot steal what they cannot see
Unreadable storage partition protected by non-recoverable key.
Cigent software is tested and validated for use with DIGISTOR SSDs.
Multi-Factor Authentication (MFA)
Requires more than one authentication for access. Multiple authentication methods include password, CAC/PIV smartcard, and PIV-supported Yubikey.
Additional Authentication for File Access
Zero-day ransomware, malware, and software service bypass prevention.
NIAP-Listed, TAA Compliant, and Common Criteria Certified
Citadel C Series Advanced SSDs are NIAP-listed, TAA compliant, and have been listed by NIST as FIPS 140-2 L2 certified storage devices with NIST Certificate #4294.
Address critical requirements for data governance and privacy programs
Citadel C Series SSDs meet CMMC, HIPAA, GDPR, GLBA, PCI-DSS, and CCPA requirements.
Documentation and Downloads
|Product name||DIGISTOR Citadel C Series Select SATA 2.5-inch 2TB FIPS 140-2 Certified SSD (DIG-SSD2C120006)|
|Form Factor||2.5in SSD 7mm|
|MTBF||More than 1,500,000 hours|
|Advanced Flash Management||Static and Dynamic Wear Leveling; Bad Block Management; TRIM; SMART|
|Performance||Read: up to 530MB/s; Write: up to 500MB/s|
|Power Consumption||Active mode: ≤ 3,735mW; Idle mode : ≤ 525mW|
|SATA Interface||SATA III; SATA Revision 3.2|
|Operating system compatibility||Windows, Linux, SecureView, Forcepoint
FIPS 140-2 Level 2 hardware level AES 256-bit encryption
|FIPS Description||FIPS 140-2 Level 2 Certified (NIST Certification #4294), NIAP-Listed (VID 11297)|
|Ambient temperature range||Operation: 0°C ~ 70°C; Storage: -40°C ~ 85°C|
|Technical Support||Your investment in DIGISTOR products is backed up by our free technical support for the lifetime of the product. If you need to contact us for any reason, visit digistor.com/support.|
Need help? Talk with our sales team.
We’re here to help you find the right secure data storage solution.