- FIPS 140-2 certified: The internal flash build has been Independently certified by one of 13 NIST specified laboratories examining the cryptographic modules. Certified by NIST’s Cryptographic Module Validation Program (CMVP). For more information, refer to the NIST site.
- NIAP-listed Common Criteria (CC) SSD for Full Drive Encryption – Encryption Engine Common Criteria (CC) collaborative Protection Profile (cPP)
- Secure Firmware: Solid secure firmware features secure digital signatures and boot-time attestation which help to protect storage devices against low-level attacks.
- Hardware level AES 256-bit encryption with TCG Opal SSC support: the encryption/decryption is performed on device, independent from the host, reducing CPU load.
- Instant Erase: The ability to complete sanitization of all data on the SSD in under 2 seconds, simplifying device retirement or redeployment.
- Conformal Coating as tamper evidence on board for physical security.
- Our Citadel SEDs make use of the TCG Opal Pre-boot authentication support to authenticate access before the computer boots, which protects the integrity of the OS.
- 3rd party key management options include but not limited to are: Absolute Software, CryptoMill, McAfee, Secude, Softex, Sophos, Symantec, Wave Systems and WinMagic. Linux FDE (Full Disk Encryption) key management methods also supported.
- TAA Compliant
Secure SED FIPS 140-2 L2 M.2 SATA SSD drives are self-encrypting drives securing all critical data using strong AES 256-bit encryption. FIPS 140-2 Level 2 hardware encryption ensures that the firmware integrity, encryption technology and physical security of the SSD all meet the requirements set forth by the Federal Information Processing Standard by the National Institute of Standards & Technology (NIST).
Our FIPS-certified SEDs, both new and existing, are CC-validated and NIAP-listed.
|Product name||1TB Secure SED FIPS 140-2 2.5-in 7mm SATA III Solid State Drive (DIG-SSD210006)|
|Form Factor||2.5in SSD 7mm|
|MTBF||More than 1,500,000 hours|
|Advanced Flash Management||Static and Dynamic Wear Leveling; Bad Block Management; TRIM; SMART|
|Performance||Read: up to 530MB/s; Write: up to 500MB/s|
|Power Consumption||Active mode: ≤ 3,000mW; Idle mode : ≤ 550mW|
|SATA Interface||SATA III; SATA Revision 3.2|
|Ambient temperature range||Operation: 0°C ~ 70°C; Storage: -40°C ~ 85°C|
|Technical Support||Your investment in DIGISTOR products is backed up by our free technical support for the lifetime of the product. If you need to contact us for any reason, visit digistor.com/support.|
Need help? Talk with our sales team.
We’re here to help you find the right secure data storage solution.